The LibLab at the Sterne Library is a technology-focused library space that provides access to technology tools, software, and training. 3D printing files included here were created with LibLab resources.
-
LibLab Bookmark
Kat Graves
A bookmark with the LibLab logo on the top and LibLab written across the bottom.
I used the same logo as the LibLab Medallion, as well as the same collection process. I also used the Blaze Bookmark and cut out both Blaze and the word "libraries" in order to make this one. This project was made in TinkerCAD. The photo was printed on an Ultimaker S5 in green PLA. It took around 25 minutes with an infill of 20% and a layer height of 0.15mm.
-
LibLab Medallion
Kat Graves
This medallion has the LibLab logo in the center with Lib above it and Lab below it. In the file uploaded, there is a hole above the "I" so that you may put it on a necklace or hang it from the ceiling, though this hole is not present in the photo.
I made this project in TinkerCAD and AnyConv.com. I first found the logo as a .jpeg file on Google. Then i used AnyConv to convert that jpeg to a stl file, which I then uploaded into TinkerCAD finished the project there. I printed it on a FlashForge Finder in gold PLA. It took about an hour and a half to print at 10% infill and 0.1mm layer height.
-
Open/Closed Sign
Kat Graves
Its an open and closed sign with gears.
One side say open. The other side says closed. Made up of gears pulled fromTinkerCAD.
-
UAB Libraries Badge Holder
Kat Graves
Here is a badge holder for your One Card. You can swipe it without taking it out of the holder! The card is held in by tension. The front says UAB Libraries The card is held in by tension. The front says UAB Libraries. There is an rounded rectangle hole for attachments.
-
UAB Libraries Business Card Holder
Kat Graves
Project Summary
This is a business card holder that says UAB Libraries on the front.Project Details
I created this in TinkerCAD using wedges, squares and text. It might be able to double as a phone stand, but I haven't tried and do not know. -
Structure Sensor Spacer
Dorothy Ogdon, Gavin Meighan, and Nicholas Wossner
A custom 3D printable insert for a Sterilite box to hold an iPad pro with attached structure sensor and bracket.
A 3D printable insert designed to be used in a commercially-produced Sterilite box. This custom insert is designed to accommodate an iPad pro with a structure sensor and bracket attached. The inner square can hold charging cables and accessories. Sections 1 and 2 available below for printing half at a time, secured together with integrated alignment pegs.
-
Blaze Medallion
Nicholas Wossner
Show your school spirit with the new printable Blaze the Dragon Medallion! Print and enjoy!
Printability may benefit from a 10% increase in size due to the font. Made for the average sized necklace chain. No_fillet model available as well. Text on back deleted for aesthetics.
-
UAB Libraries Bookmark
Nicholas Wossner, Dorothy Carol Ogden, Gavin Meighan, and Joshua Nixon
A revised library bookmark with the wonderful UAB mascot! Created using SolidWorks! Feel free to print and enjoy marking pages with your favorite book buddy.
-
Cactus Pot
Gavin Meighan
This is a decorative cactus/plant pot designed in solid works by using the loft feature between two offset sketches.
The project file is sldprt, and has also been uploaded in step, 3mf, and wrl formats.
-
Floor Outlet Safety Cover
Gavin Meighan, Dorothy Ogdon, and Nicholas Wossner
This is an object designed to press fit around a raised floor outlet in order to prevent any accidents involving tripping over or stubbing one's toe on the outlet.
This object was designed in Solidworks and exported as an .STL for the express purpose of being printed on an FDM 3D printer. It is recommended that this object be printed using a more robust material such as ABS or PETG due to the nature of it's use. The print can be done at a lower resolution to decrease print time as a higher resolution benefits the print in no way.
The UAB Libraries Emerging Technolgy and System Development department created 6 of these outlet safety covers and is using them in Sterne Library Virtual reality.
